Dynamic weighing ensures more accurate and reliable weighing in larger machines

PTE Scales mobile weighing solutions are based on hydraulic measurements to achieve the most reliable weighing results. However, many loaders and  telescopic handlers tend to have internal leakages and frictions in the hydraulic lifting system. To be able to use hydraulic scale under these conditions, there must be something to overcome undesired effects.

S2 display combined with the add-on dynamic weighing system forms an accurate and user-friendly dynami scale. The dynamic weighing system is an upgrade for the S2 loader scale. Dynamic weighing system consists of two proximity sensors and cables which can be easily connected to the S2 displays M12-port. Weighing sequence is initiated during upwards movement when the loader beam is at close proximity to lower proximity sensor. The results is calculated and shown when the beam is at close proximity to second proximity sensor. This ensures best repeatibilty by eliminating frictions and user errors, making the weighing process faster and easier.

PTE Scales -are designed, manufactured and programmed in Finland.

Thanks to a practical display device and easy functions, the use of the scales is easy and fast. Cumulative weighing function is standard in all models and if necessary, the display device is easy to equip with a printer.

The display device has a internal calibration memory, which allows the use of the same display device in multiple working machines. One display device can be used, for example, with front and rear loader of the tractor, by choosing the right calibration from the calibration menu.

There is no other scale that is as fast and easy to install and set up.

High quality pressure sensor is accurate and reliable under all conditions.

  • Versatile mounting methods ensures multiple installation positions of the display device in the cockpit.
  • Scales operate with 8-30 VDC voltage available from the working machine itself. If needed, the scales can be equipped with an additional voltage supply.
  • proximity sensors and the display device is connected with M12-connector cable. Connecting with cables well known from industrial applications is reliable and fail-safe.
  • Power supply cabling can be done with several different options which can be selected when ordering.
Contact us



  • PTE S2 – display
  • 2pcs 250bar pressure sensors
  • Pressure sensor cables
  • Power cabling
  • Mounting bracket
  • 2pcs proximity switches
  • Proximity switch cables
  • Installation-/operation manual


  • Supply voltage (options) 12 VDC (9-72 VDC)
  • Pressure range with basic delivery (optios) 0-250bar (0-100bar, 0-400bar)
  • Display IP-class IP40
  • Pressure sensor IP-class IP67
  • Display size 103 x 150 x 28mm
  • Proximity switch tricker distance 8mm


  • Tare
  • Zero-point offset
  • Gross/Net display
  • 1-9 calibration weights
  • Rounding (1/5/10/50/100kg)
  • Units lb/kg
  • Languages Finnish, English, Swedish
  • Memory: 1000 different weighings
  • Automatic add – function


  • Printer
  • Remote switch for weighing and saving weighing results


  • Cabling with connector cables
  • Industrial connectors
  • Easy-to-read manual

Contact us

Fill out the form below or call us: +358 44 578 6653